A multiroom incubator for embryo culture with 6 independent chambers preventing cross contamination without causing any disturbance to the neighboring chambers even when the lids are opened/closed.
FEATURES:
Six independent MIRI® chambers, with precise temperature and gas regulation: Opening any chamber does not affect the environment in other chambers. Temperature or gas fluctuation caused by opening the lid have no impact on the rest of the system.
Works with premix gas or 100% CO2 gas, with NDIR CO2 sensor to regulate CO2 levels. HEPA-VOC gas filtration system ensure clean gas recirculation
Heated chamber lids prevent condensation, enhance temperature regulation/recovery, and ensure temperature uniformity between the top and bottom of the chamber.
Temperature recovery <1 min Gas recovery <3 mins.
Large easy to read LED display and easy to navigate menu.
Heating plate inserts to fit commonly used embryo culture dishes.
Gas sampling ports for each chamber and independent PT-1000 sensors allow external quality evaluation of gas levels and temperature in each chamber.
Continually monitors and documents gas flow, gas concentration and pressure, and temperature regulation.
Audible alarms for out of range parameters, with alarm logs documented in the Data Logger.
Maximise the laboratory workplace by letting go of bulky computers and saving space with a tablet and a MIRI® stacking frame. Real time parameters such as temperature, gas concentration points, gas input pressures, gas flow rates, and even pH measurement can be conveniently viewed through the touchscreen tablet.
Optional SAFE Sens integration for continuous pH monitoring without opening the chamber.
|
ITEM CODE |
MODEL CODE |
DESCRIPTION |
|
Unit |
|
|
|
2070047 |
MRI-6A10-8 |
MIRI® Incubator, 230V, 50/60Hz |
|
2070048 |
MRI-6A10-9 |
MIRI® Incubator, 115V, 50/60Hz |
|
2070086 |
MRI-6A10-SS-8 |
MIRI® Incubator, with SAFE Sens for pH measurement, 230V, 50/60Hz |
|
2070087 |
MRI-6A10-SS-9 |
MIRI® Incubator, with SAFE Sens for pH measurement, 115V, 50/60Hz |
|
1320045 |
MRI-GA |
MIRI® GA CO2 / O2 & Temperature Validation Unit, 115V / 230V |
|
Accessories |
|
|
|
1320140 |
TBA |
PC Holder for MIRI® |
|
1320141 |
TBA |
Tablet PC for Data Logging of MRI-6A10 |
|
1320142 |
TBA |
Set of Tablet PC and Holder For Data Logging of MRI-6A10 |
|
1320191 |
TBA |
SAFE Sens TrakStation, a tablet with SAFE Sens Software, for pH monitoring |
|
1320011 |
MRA-1007 |
HEPA+VOC filter (recommended to be replaced every 3 months) |
|
1320018 |
MRA-1014 |
Stacking frame for 2 units 1320226 TBA Stacking Frame for 2 Units,
With Drawer at the Bottom |
|
1081277 |
TBA |
SAFE Sens SV2 Sensor, Pack of 10 pieces (shelf-life 12 months) |
|
1081278 |
TBA |
SAFE Sens QC2 Alignment Tool |
|
ITEM CODE |
MODEL CODE |
DESCRIPTION |
|
Accessories |
|
|
|
132003 |
TBA |
Insert for Falcon® Dishes |
|
132004 |
TBA |
Insert for NUNC® Dishes |
|
1320070 |
TBA |
Insert for Vitrolife® Dishes |
|
1320099 |
TBA |
Insert for Nipro Dishes |
|
1320100 |
TBA |
Insert for LifeGlobal/ GPS DishesTM |
|
1320101 |
TBA |
Insert Without Footprint for Plain Dishes |
|
1320118 |
TBA |
Insert for Sparmed - OosafeTM |
|
1320219 |
TBA |
Insert for Falcon® Dishes, with hole for SAFE Sens |
|
1320220 |
TBA |
Insert for NUNC® Dishes, with hole for SAFE Sens |
|
1320221 |
TBA |
Insert for Vitrolife® Dishes, with hole for SAFE Sens |
|
1320222 |
TBA |
Insert for Nipro Dishes, with hole for SAFE Sens |
|
1320223 |
TBA |
Insert for LifeGlobal/ GPS DishesTM, with hole for SAFE Sens |
|
1320224 |
TBA |
Insert Without Footprint for Plain Dishes, with hole for SAFE Sens 1 |
|
320225 |
TBA |
Insert for Sparmed - OosafeTM, with hole for SAFE Sens |
THE ESCO GROUP
